?2001 fairchild semiconductor corporation rev. a1, september 2001 kse13003 npn silicon transistor absolute maximum ratings t c =25 c unless otherwise noted electrical characteristics t c =25 c unless otherwise noted * pulse test: pulse width=5ms, duty cycle 10% symbol parameter value units v cbo collector-base voltage 700 v v ceo collector-emitter voltage 400 v v ebo emitter-base voltage 9 v i c collector current (dc) 1.5 a i cp collector current (pulse) 3 a i b base current 0.75 a p c collector dissipation (t c =25 c) 20 w t j junction temperature 150 c t stg storage temperature - 65 ~ 150 c symbol parameter test condition min. typ. max. units bv ceo collector-emitter breakdown voltage i c = 5ma, i b = 0 400 v i ebo emitter cut-off current v eb = 9v, i c = 0 10 a h fe *dc current gain v ce = 2v, i c = 0.5a v ce = 2v, i c =1a 8 5 40 v ce (sat) *collector emitter saturation voltage i c = 0.5a, i b = 0.1a i c = 1a, i b = 0.25a i c = 1.5a, i b = 0.5a 0.5 1 3 v v v v be (sat) *base emitter saturation voltage i c = 0.5a, i b = 0.1a i c = 1a, i b = 0.25a 1 1.2 v v c ob output capacitance v cb = 10v , f = 0.1mhz 21 pf f t current gain bandwidth product v ce = 10v, i c = 0.1a 4 mhz t on turn on time v cc =125v, i c = 1a i b1 = 0.2a, i b2 = - 0.2a r l = 125 ? 1.1 s t stg storage time 4.0 s t f fall time 0.7 s kse13003 high voltage switch mode applications ? high speed switching ? suitable for switching regulator and motor control 1 to-126 1. emitter 2.collector 3.base
?2001 fairchild semiconductor corporation kse13003 rev. a1, september 2001 typical characteristics figure 1. static characteristic figure 2. dc current gain figure 3. base-emitter saturation voltage collector-emitter saturation voltage figure 4. switching time figure 5. safe operating area figure 6. power derating 012345 0.0 0.4 0.8 1.2 1.6 2.0 i b = 0 100ma 150ma 200ma i b = 50ma 250ma 300ma 400ma 450ma i b = 500ma 350ma i c [a], collector current v ce [v], collector-emitter voltage 0.01 0.1 1 10 0.1 1 10 100 v ce = 2v h fe , dc current gain i c [a], collector current 0.01 0.1 1 10 0.01 0.1 1 10 i c = 4 i b v ce (sat) v be (sat) v be (sat), v ce (sat)[v], saturation voltage i c [a], collector current 0.1 1 0.01 0.1 1 10 t stg t f t stg , t f [ s], switch time i c [a], collector current 1 10 100 1000 0.01 0.1 1 10 100 s 10 s 1ms 5ms i c max. (pulse) i c max. (dc) i c [a], collector current v ce [v], collector-emitter voltage 0 25 50 75 100 125 150 175 0 5 10 15 20 25 30 35 40 p c [w], power dissipation t c [ o c], case temperature
package demensions ?2001 fairchild semiconductor corporation rev. a1, september 2001 kse13003 dimensions in millimeters 3.25 0.20 8.00 0.30 ?.20 0.10 0.75 0.10 #1 0.75 0.10 2.28typ [2.28 0.20] 2.28typ [2.28 0.20] 1.60 0.10 11.00 0.20 3.90 0.10 14.20max 16.10 0.20 13.06 0.30 1.75 0.20 (0.50) (1.00) 0.50 +0.10 ?.05 to-126
disclaimer fairchild semiconductor reserves the right to make changes without further notice to any products herein to improve reliability, function or design. fairchild does not assume any liability arising out of the application or use of any product or circuit described herein; neither does it convey any license under its patent rights, nor the rights of others. life support policy fairchild?s products are not authorized for use as critical components in life support devices or systems without the express written approval of fairchild semiconductor corporation. as used herein: ?2001 fairchild semiconductor corporation rev. h4 trademarks the following are registered and unregistered trademarks fairchild semiconductor owns or is authorized to use and is not intended to be an exhaustive list of all such trademarks. 1. life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, or (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in significant injury to the user. 2. a critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. product status definitions definition of terms datasheet identification product status definition advance information formative or in design this datasheet contains the design specifications for product development. specifications may change in any manner without notice. preliminary first production this datasheet contains preliminary data, and supplementary data will be published at a later date. fairchild semiconductor reserves the right to make changes at any time without notice in order to improve design. no identification needed full production this datasheet contains final specifications. fairchild semiconductor reserves the right to make changes at any time without notice in order to improve design. obsolete not in production this datasheet contains specifications on a product that has been discontinued by fairchild semiconductor. the datasheet is printed for reference information only. star*power is used under license acex? bottomless? coolfet? crossvolt ? densetrench? dome? ecospark? e 2 cmos? ensigna? fact? fact quiet series? fast ? fastr? frfet? globaloptoisolator? gto? hisec? isoplanar? littlefet? microfet? micropak? microwire? optologic? optoplanar? pacman? pop? power247? powertrench ? qfet? qs? qt optoelectronics? quiet series? slient switcher ? smart start? star*power? stealth? supersot?-3 supersot?-6 supersot?-8 syncfet? trutranslation? tinylogic? uhc? ultrafet ? vcx?
fairchild semiconductor space space space search | parametric | cross reference ? ? space product folders and datasheets application notes space space space find products ? home >> find products >> space space space space products groups space analog and mixed signal discrete interface logic microcontrollers non-volatile memory optoelectronics markets and applications new products product selection and parametric search cross-reference search technical information buy products technical support my fairchild company kse13003 npn silicon transistor ? ? related links request samples dotted line how to order products dotted line product change notices (pcns) dotted line support dotted line distributor and field sales representatives dotted line quality and reliability dotted line design tools contents features | applications | product status/pricing/packaging features high speed switching l suitable for switching regulator and motor control l back to top applications high voltage switch mode back to top space datasheet download this datasheet pdf e-mail this datasheet [e-mail] this page print version product status/pricing/packaging product product status pricing* package type leads packing method kse13003astu full production $0.221 to-126 3 rail kse13003tatu full production $0.35 to-220 3 rail KSE13003TH1ATU full production $0.35 to-220 3 rail kse13003as full production $0.221 to-126 3 bulk kse13003h1astu full production $0.221 to-126 3 rail kse13003h2astu full production $0.221 to-126 3 rail kse13003th2atu full production $0.35 to-220 3 rail kse13003th2a full production $0.35 to-220 3 bulk kse13003th1a full production $0.35 to-220 3 bulk * 1,000 piece budgetary pricing back to top ? ? ? ? space space home | find products | technical information | buy products | support | company | contact us | site index | privacy policy ? copyright 2002 fairchild semiconductor product folder - fairchild p/n kse13003 - npn silicon transistor file:///h|/imaging/bitting/cpl/20020725_1/07252002_10/fair/07252002/kse13003.html (1 of 2) [jul-26-2002 9:31:28 am]
|
